Relearn Type – OBD + Programming Tool
Standard Key
Relearn procedure: OBD + Programming Tool
- Select either:
- Change Pressure to Activate Sensors
- Use a second activation Tool to Activate Sensors
- If using “Change Pressure to Activate Sensors” over inflate tyres to correct pressure plus 7psi/0.5Bar
- Ensure ignition is turned OFF and apply parking brake
- Read all sensor IDs using tool
- Ensure all Sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the relearn toolkit
- Turn ignition ON
- Connect tool OBD II port
- Follow screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
- Repeat for RF, RR and LR
- Tool will display each wheel in turn and “Success” when relearn is completed
- NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure
Push Button
Relearn procedure: OBD + Programming Tool
- Select either:
- Change Pressure to Activate Sensors
- Use a second activation Tool to Activate Sensors
- If using “Change Pressure to Activate Sensors” over inflate tyres to correct pressure plus 7psi/0.5Bar
- Ensure ignition is turned OFF and apply parking brake
- Read all sensor IDs using tool
- Ensure all Sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the relearn toolkit
- Turn ignition ON
- Connect tool OBD II port
- Follow screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
- Repeat for RF, RR and LR
- Tool will display each wheel in turn and “Success” when relearn is completed
- NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure