TPMS Service Tools
" If you don't use the correct TPMS tools you risk damaging the Sensor or Service Kit component"
!
TCD 8100E

Complete TPMS Toolkit

Complete TPMS Tool Kit with case. Contains:
2-10 N.m. Torque Wrench with 11mm and 12 mm sockets
Rubber Grommet / Washer Removal Tool
T-6 Torque Screwdriver 
T-10 Torque Screwdriver bit
T-15 Torque Screwdriver bit
T-20 Torque Screwdriver bit
Valve Core Torque Screwdriver - pre-set to 0.5 N.m 
TCD 8100E
TCD 5103
TPMS Torque Wrench

TPMS Torque Wrench

TPMS Torque Wrench 2-10 N.m. torque wrench, 3/8″ drive, complete with 11mm & 12mm sockets

TCD 5103

Dill
TCD 5535
T-20 Torque Screwdriver

T-20 Torque Screwdriver

TPMS  T-20 Torque Screwdriver for the base of Beru valves with pre-set torque 4 N.m. (35 in-lb)

TCD 5535

TCD 5414
Valve Core Torque Driver
Valve Core Torque Driver

TPMS Valve Core Torque Driver

Valve core torque driver - 0.5 Nm 

  • Prevents over or under torquing
  • A must for the TPMS valves to maintain proper pressure
  • Both a core remover and precise installer
  • Prevents premature tyre failure due to leaking valves
  • Easy and simple to use

Schrader no 65783-67 , Dill No 5414

TCD 5414

Dill
TCD 5415
T-10 Torque Screwdriver

T-10 Torque Screwdriver

TPMS T-10 Torque Screwdriver for the base of snap-in and clamp-in valves ( excl. Beru)  with preset torque 1.4 N.mm (12.5 in-lbs)

TCD 5415

Dill
TCD 4700
Rubber Washer Remover

Grommet Removal Tool

Rubber Grommet removal tool,

 

TCD 4700

Dill
TCD 8911
Removal and Seating Tool

4-Way Removal and Seating Tool

4-Way TPMS Nut Removal and Grommet Seating Tool

 

 

TCD 8911

Dill
TCD 8910
TPMS Fishing Tool

TPMS fishing tool

3-way TPMS fishing tool

 

 

TCD 8910